Reference / Effects / Audio
Updated
Reverb
Reverb is an Audio effect.
What it does
Section titled “What it does”The room is Freeverb, tuned to the sample rate it runs at.
Parameters
Section titled “Parameters”| Parameter | Control | Range | Default | Unit |
|---|---|---|---|---|
| Room size | Slider | 0 to 100 | 50 | Per cent |
| Damping | Slider | 0 to 100 | 50 | Per cent |
| Width | Slider | 0 to 100 | 100 | Per cent |
| Pre-delay | Slider | 0 to 200 | 20 | - |
| High cut | Slider | 500 to 20000 | 12000 | - |
| Dry | Slider | 0 to 100 | 100 | Per cent |
| Wet | Slider | 0 to 100 | 30 | Per cent |
What each control does
Section titled “What each control does”- Room size: how long the room holds on to the sound.
- Damping: how much top end each reflection loses.
- Width: how far apart the two channels’ rooms are heard. At 0 the tail is mono.
- Pre-delay: the gap between the sound and the room answering it, in milliseconds.
- High cut: a low pass over the tail alone, in Hz.
- Dry: how much of the sound itself reaches the output.
- Wet: how much of the room reaches it.